The core constraints on direct-to-device satellite service from ordinary phones are now clear: the phone’s maximum transmit power is 23 dBm, the satellite’s slant range is roughly 550 to 1,815 kilometers, and the available link margin supports only SMS and low-speed data. This matters because satellite communications are entering the consumer market, and the real scarcity is not the number of satellites. The question is whether phones can maintain a stable connection with their existing antennas and batteries.

What this is

The RF front end is the module in a phone responsible for signal transmission and reception through components such as antennas, filters and power amplifiers. It determines whether a phone can receive signals from satellites and send data back beyond the reach of terrestrial cellular networks.

The path loss caused by distance to a satellite is far greater than that of a ground-based network. According to the article’s calculations, the path loss at 2 GHz over a 993-kilometer slant range is approximately 158.4 dB, about 58 dB more than a one-kilometer terrestrial cellular link. Satellites compensate by using large-aperture phased-array antennas of roughly 20 square meters to increase receive gain, while phones must minimize signal loss wherever possible.

Frequency congestion is an even more difficult problem. The L band used for direct-to-device service sits next to satellite navigation and terrestrial cellular bands, requiring filters with high rejection and strong out-of-band suppression. For every additional 1.2 dB of filter insertion loss, the effective link distance shrinks by roughly 13%.

Industry view

We believe the near-term value of direct-to-device satellite service lies primarily in emergency communications, outdoor positioning and supplementary SMS, rather than in replacing terrestrial 5G or mobile broadband. More compute, denser satellite constellations and terminal RF improvements can enhance the experience, but they cannot bypass the physical limits imposed by limited phone antenna gain and constrained battery power.

The risks are equally clear. Satellites transmit at high power, so whether ordinary phones can maintain a connection without overheating or draining their batteries too quickly must be validated in real-world conditions. If advertised speeds are overly optimistic, users may still encounter a service with high latency, limited throughput and performance affected by weather and the number of visible satellites. The cost of deploying constellations, spectrum coordination and satellite launch failures will also affect coverage and the pace of commercialization.

Impact on regular people

For enterprise IT: Direct-to-device satellite connectivity can serve as a backup link when terrestrial networks go down, but businesses still need to assess coverage, pricing, message formats and security mechanisms. It should not be treated as a direct replacement for existing leased lines.

For professionals: Connection reliability will improve for fieldwork, cross-region travel and emergency communication. In the short term, position reporting and SMS will remain more practical than sustained high-speed file uploads.

For the consumer market: Satellite connectivity will gradually become a selling point for high-end phones, but consumers should distinguish between “able to send SMS” and “able to browse at high speeds.” They should also check plan fees, battery life and regional availability.